Emergent Charging
Connect the transceiver directly with adaptor or car charger to charge.
Note:Please power off the transceiver before charging the transceiver in this way. Also, it takes
longer time (totally 12hours) to fully charge the transceiver in this way.
How to Store the Battery
1.
If the battery needs to be stored, keep it in status of 50% discharged.
2.
It should be kept in low temperature and dry environment.
3.
Keep it away from hot places and direct sunlight.
WARNING:
▲
Do not short circuit battery terminals.
▲
Never attempt to remove the casing from the battery pack.
▲
Never assemble the battery in dangerous surroundings, spark may cause explosion.
▲
Do not put the battery in hot environment or throw it into fire, it may cause explosion.
PREPARATION
Installing / Removing the Battery
■
Installing the battery:
Match the
battery pack with the corresponding guides on the back of the transceiver, and push it
upwards till it is fully locked by the battery latch.
To Next Page
Loading...