6. CTCSS: 67Hz- 254.1Hz, 50 groups in total, Default: 67Hz.
7. DCS: 017N-765I, 232 groups in total. "N" stands for positive code, "I" Stands for
reverse code.
8. Press key to back to previous menu. Press key or key to confirm
and exit.
CTCSS/DCS Encode Setup
1. After pressing key, the top left corner of LCD displays F icon and then press
key to enter into function menu.
2. Press key to choose No.2 function item. It shows “T-CDC” on LCD.
3. Press key to enter into function menu setup.
4. Press key to choose CTCSS, DCS or OFF. When DCS signaling is selected,
press
key to choose DCS positive or inverse code.
5. Press keyor key to choose the desired CTCSS / DCS encode signaling.
6. CTCSS: 67Hz- 254.1Hz, 50 groups in total
7.
DCS: 017N-765I, 232 groups in total. "N" stands for positive code,
"I" stands for inverse code.
8. Press key to return back to previous menu. Press key or key to confirm and exit.
CTCSS/DCS Encode/Decode Synchronous Setup
It means that users can synchronize the CTCSS/DCS decode and encode. Also, users can adjust them
simultaneously.
CHANNEL OPERATIONS
To Next Page
Loading...