key to confirm
and exit.
Repeater Function
Press function key and press to activate and de-activate. This symbol will
appear when switched on
CHANNEL OPERATIONS
4
+/-
1. After pressing key, the top left corner of LCD displays F icon and then
press key to enter into function menu.
2. Press to choose No. 3 function item. It shows “C-CDC”on LCD.
3. Press to enter into function menu setup.
4. Press key to choose CTCSS, DCS or OFF. When DCS signaling is selected,
press
!
key to choose DCS positive or inverse code.
5. Press keyor key to choose the desired CTCSS / DCS encode signaling.
6. CTCSS: 67Hz- 254.1Hz, 50 groups in total
7. DCS: 017N-765I, 232 groups in total. "N" stands for positive code, "I" stands
for reverse code.
8. Press key to back to previous menu, press key or
SHORTCUT OPERATIONS
To Next Page
Loading...