Crystal DBH50R - TOT Timer Setup

BACKGROUND OPERATIONS
Under any mode, the background operations will be changed & stored as the latest value
permanently, until next change, operations as followings:
1. With the radio turned off, press and hold [PF1] key and then turn on the transceiver.
Keep pressing [PF1] key for 3 seconds to enter into background operations.
1. With the radio turned off, press and hold [PF1] key and then turn on the transceiver.
Keep pressing [PF1] key for 3 seconds to enter into background operations.
2. Press key to choose the menu item you want to set.
3. Press key to enter menu setup.
4. Press key or key to choose the desired setup.
5. Press to back to previous menu and key or key to confirm and exit.
TOT Timer Setup
The purpose of Time-out-timer is to restrict transceiver for continuous long-term transmission.
When the continuous transmission time is beyond the due time, transceiver is forced to stop
transmitting and make a sound of beeping.
2. Press key to choose No.1 function item. It shows “TOT” on LCD.
3. Press key to enter into function menu setup.
4. Press key or key or key to set desired TOT time;
BACKGROUND OPERATIONS