2. Press key to choose No.8 function item. It shows “PTT-ID” on LCD.
3. Press key to enter into function menu setup.
4. Press key or
key to choose the desired setup
BOT:
Start, press PTT key to send a series of DTMF code.
EOT:
End, release PTT key to send a series of DTMF code.
BOTH:
Start and End;
OFF:
PTT ID is turned off.
5. Press key to back to previous menu and key or key to confirm and exit.
TX OFF
After starting this function, [PTT] key is unavailable. Current channel of transceiver is working under
receiving mode.
1. After pressing key, the top left corner of LCD displays F icon. And then press key to enter
into function menu.
2.
Press key to choose No.9 function item. It shows “TX-IHB” on LCD.
3. Press key to enter into function menu setup.
4. Press key or key to choose the desired setup.
ON:
TX Off is enabled.
OFF:
TX Off is disabled.
5. Press key to back to previous menu and key or key to confirm.
To Next Page
Loading...