1. After pressing key, the top left corner of LCD displays F icon and then
press to enter into function menu.
2. Press key to choose No.6 function item. It shows “REV/TA” on LCD.
3. Press key to enter into function menu setup.
4. Press key or key or key to choose the desired setup.
REV:
The frequency reverse function is selected.
TA:
The talk around function is selected.
6. Press key to back to previous menu and key or key to confirm and
exit.
NOTE: After relevant function is selected on current channel, under standby
mode, users can press
key and then hold
key to start chosen function.
Busy Channel Lockout
BCLO is to disable transmitting while RX signal is received. Once the channel
is busy and you press PTT, the radio will beep as warning and get back to
receiving.
1. After pressing key, the top left corner of LCD displays F icon and then
press key to enter into function menu.
2. Press key to choose No.7 function item. It shows “BUSY” on LCD.
3. Press
To Next Page
Loading...