Crystal DBH50R - Background Operations - VOX Functionality; VOX (Voice Operated Exchange) Setup

key to confirm and
exit.
VOX Delay Setup
The fact that the transceiver sends the calling by VOX and instantly returns to receiving mode might
result in residual information loss. To avoid this loss, you can set suitable delay time.
BACKGROUND OPERATIONS
key to confirm
and exit.
VOX Setup
When this function is enabled, you can begin transmitting by speaking,
no needing to press the [PTT] key.If you want to make use of this function, you
should insert the earpiece fitted with the transceiver.
2. Press key to choose No.2 function item. It shows “VOX” on LCD.
3. Press key to enter menu setup.
4. Press key or key to choose the desired VOX level.
5. Press
!
to back to previous menu and key or
1. With the radio turned off, press and hold [PF1] key and then turn on the transceiver.
Keep pressing [PF1] key for 3 seconds to enter into background operations.
15-600 seconds, 10 minutes of TOT is to be optional, per level interval of 15
seconds.
5. Press
!
key to back to previous menu. Press key or