DTMF Code Enquiry and Setup
After pressing key , the top left corner of LCD displays and then press key to show the
DTMF data of current groups (16 groups in total).
1. Press key or key to choose the desired group and DTMF data. If this group can edit DTMF
data, it will display current group number and “__”.
2. When current group display “__”, pressing key, the top left corner of LCD displays After
pressing and holding
key for 2 seconds, transceiver voices beeping of “DU” and then comes
into DTMF edit
state. Now you can enter the DTMF editing data you need by
keypad.
3. After finishing setup, press side key [PF1] to make a sound of DTMF dialing,
to save and exit.
Transmitting DTMF Signaling
Holding PTT key, users can transmit DTMF Signaling by entering DTMF data
on the keypad.
Note:
stands for “A”, for “B”, for “C”, for “D”.
Frequency Reverse/Talk around On/off
After pressing key, the top left corner of LCD displays and then press
key for 1 second to start frequency reverse or talk around. Repeat the above
operations to exit. NOTE: If frequency reverse displayed in current channel,
this operation will be enable and disable Frequency Reverse.
Or else, it is as enable and disable Talk Around.
SHORTCUT OPERATIONS
To Next Page
Loading...