Crystal DBH50R - VOX Beep Setup

1. Press and hold [PF1] key till the transceiver emits “a tone”, and then release it to
enter into background operation.
2. Press
key to choose No.3 function item. It shows “VOXDEY” on LCD.
3. Press key to enter into function menu setup.
4. Press key or key to choose the desired setup.
0.5S-5S, 10 levels of delay time in total to choose, per level interval of 0.5S.
5. Press to back to previous menu and key or
key to confirm and exit.
VOX Beep Setup
After enabling this function, beginning transmitting by VOX, the transceiver will voice beeping.
1. Press and hold [PF1] key till the transceiver emits “a tone”, and then release it to enter into
background operation.
2. Press
key to choose No.4 function item. It shows “VOXTON”on LCD.
3. Press key to enter menu setup.
4. Press key or key to choose the desired setup.
ON:
VOX beeping is enabled.
OFF:
VOX beeping is disabled.
5. Press to back to previous menu and key or
key or key to confirm and exit.
BACKGROUND OPERATIONS