Editing Channel
1. Under VFO frequency mode, enter the desired frequency and set other items. Afterwards, press
key and then the left top of the LCD displays F icon. Hold the key till the transceiver emits “DU”
and LCD displays 1st channel to enter the Channel Setting Save mode.
2. Press key to select the channel you want to update the settings.
3. Hold key till the transceiver emits “a tone” to save the settings.
Deleting Channel
Under channel mode, select the channel that you want to delete. Then, press key to enter
FUNC setting with F icon displayed on the LCD. Finally, hold the
key to delete the channel till the
transceiver emits “a tone” and skip to other channel.
ON/Off FM Radio
press key and the LCD will display “FM INI” and current FM frequency.
Namely, FM Radio is started. At this case, you can operate the FM radio freely.
Repeat above operations to turn off FM Radio.
Under standby state, press
key to enter FUNC setting with F icon displayed on the LCD. Then,
SHORTCUT OPERATIONS
To Next Page
Loading...