Crystal DBH50R - Transceiver Preparation Procedures; Battery Pack Installation and Removal; Antenna Attachment and Detachment

50 pages

To Next Page

To Previous Page

PREPARATION

■

Removing the battery pack

Slide

up the battery latch and remove the pack away from the

transceiver.

Installing / Removing the Antenna

■

Installing the Antenna:

Scre

w the antenna into the connector on the top of the

transceiver by holding the antenna at its base and turning it

clockwise

■

Removing the Antenna:

Turn the antenna anticlockwise to remove it.

■

Installing the Belt Clip

Installing the Belt Clip: Place the belt clip to the

corresponding grooves on the back of the

transceiver, and then screw it. clockwise