To make changes, first select a menu with button
„>“ and confirm selection by pressing „OK“ .
It is possible to define a password. The required
password length is 4 digits.
Please select with button „>“ a figure and confirm it
with „OK“ .Repeat this 4 times.
With „<“ the last figure could be deleted.
Password input have to be inserted twice.
Confirmation of input/password by pressing „OK“.
Factory settings for password at the time of
delivery: 0000 (4 times zero).
Currently 4 languages have been implemented
and could be selected with button „>“.
Change of language by confirming with “OK”.
Leaving the menu with button “back”.