Operation
VX 570 English V1.10 Seite 32 von 44
11.3.1.4.2 Setting Filter- / AV-Time
Setup → Sensor Setup→ Advanced
→
Filter/Average
→
Filtertime
Setup → Sensor Setup→ Advanced
→
Filter/Average
→
AV-Time
11.3.1.4.3 Definition of used Measuring-Medium
Setup → Sensor Setup→ Advanced
→
Medium
The time period for averaging can be entered
here.
Input values of -1440 1 [minutes] are possible.
For average values, see display window 3 + 4.
The range of application can be defined under
the item "Medium.
Select the "Medium" key with ">" and change
medium (gas, liquid or steam) with "OK".
Define the medium density by selecting the
"Density" key with ">" and activating it with
"OK".
Enter / change the value by selecting the
respective numerical position with the ">" key
and activating it with "OK".
Pressing ">" increases the value by 1 each
time. Confirm changes with "OK" and activate
the next numerical position.
Complete the entry by pressing the "OK"
button.
Changes made are accepted with "Save" and
finally by confirming with "OK".