CTC Union ETU-01A User Manual

Chapter 3. LCD Operation
33
May 2011
3.4.10 Miscellaneous Setup Detail
The following shows the setup screens under the Miscellaneous Parameter Screen.
Miscellaneous Parameter Display
< M I SCELLANEOUS >
SETUP
Press ENTER.
< M I SCELLANEOUS >
L C D LIGHT:AUTO
Use the arrow keys to browse the two menu screens under Miscellaneous. They are LCD
LIGHT and RESET TO DEFAULT. While displaying the LCD LIGHT screen, press ENTER.
Use the arrow keys to browse the available options for the LCD back lighting. They are:
AUTO; The backlight will automatically turn off in 5 minutes if no key is pressed. The
backlight will automatically turn on again if any key is pressed. Default is AUTO.
ON; The backlight will remain permanently on.
OFF; The backlight will remain permanently off.
Select the appropriate value and press ENTER.
Use the arrow keys to browse to the RESET menu.
< M I SCELLANEOUS >
R E S E T TO DEFAUL T
Press ENTER.
R E S E T TO DEFAUL T
P R E SS [ENTER]
Press the ENTER key to completely reset all parameters to their original factory defaults.
3.4.11 Alarm Buffer Display Detail
Use this function to display the local or remote Alarm Buffer and/or clear the local Alarm Buffer.
< A L ARM BUFFER >
D ISPLAY

CTC Union ETU-01A Specifications

General

Brand	CTC Union
Model	ETU-01A
Category	Control Unit
Language	English