EasyManuals Logo

CTC Union FRM220-100M User Manual

CTC Union FRM220-100M
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
3.2 Web Login
3.2.1 Introduction
In an effort to make Networking devices easier to configure, many devices can now be configured via a Web Page, which should be
familiar to all Internet users.
The web page is accessed by the Default IP Address of the device from a Web Browser such as Internet Explorer or Firefox in the
following way:
10.1.1.1/ (Assuming the Default IP Address is 10.1.1.1 )
Before accessing this device by web browser, the IP address must be known or it must be reset or changed to be used on the desired
network. Please refer to Chapter 1, section 1.6 or to Chapter 2, section 3.1.9 for the factory reset procedure. To configure the IP address via
console, refer to Chapter 3, section 3.1.7 for IP Address settings. If you do not have ability to access the console configuration, then you must
set your PC to the default IP subnet and access this device that way. Then you can change the IP address through the web interface.
3.2.2 Web Login Page
Access the device via a web browser.
Enter the password and click “Login”.
25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CTC Union FRM220-100M and is the answer not in the manual?

CTC Union FRM220-100M Specifications

General IconGeneral
BrandCTC Union
ModelFRM220-100M
CategoryMedia Converter
LanguageEnglish

Related product manuals