1.4 Specifications
Optical Interface
Connector SFP cage (100MS) or Duplex SC, ST, FC (100M)
Data rate 100Base-FX (125Mbps optical rate)
Duplex mode Full duplex on fiber
Fiber Depends on SFP
Distance Depends on SFP
Wavelength Depends on SFP
Electrical Interface
Connector RJ-45, shielded
Data rate auto, 10mbps (10Base) or 100mbps (100Base)
Duplex mode auto, Full or Half
Cable Cat 5 or better
Distance 100meters maximum
Indications LED (PWR, FX Link, LAN Link, LAN Speed)
Power (Card supports hot-swapping)
Input Card : 12VDC, Standalone : AC, DC options
Consumption <4W
Dimensions 155 x 88 x 23mm (D x W x H)
Weight 110g
Temperature 0 ~ 60°C (Operating), -10 ~ 70°C (Storage)
Humidity 10 ~ 90% non-condensing
Certification CE (EMI/LVD), FCC, RoHS Compliant
MTBF 75000 hrs
1.5 Management Features
Both models may be placed in a stand-alone chassis with console port, allowing support of a text based serial terminal with an easy to use
menu system for configuration. Once configured for TCP/IP access, they also support a Web Smart GUI for intuitive setting via point & click.
When placed in FRM220 managed chassis, the card is configured and monitored through the chassis NMC (network management controller)
via console, Telnet, Web HTTP or SNMP.
9
To Next Page
Loading...
