To Next PageTo Next Page
Need help?Do you have a question about the Cub SENSOR AID and is the answer not in the manual?
General| Brand | Cub |
|---|---|
| Model | SENSOR AID |
| Category | Diagnostic Equipment |
| Language | English |
Explains the function of the power button on the device keypad.
Details the use of arrow keys and the enter key for navigation and selection.
Describes the USB port's role in software updates via CUB software.
Explains the meaning of indicator lights like Low Battery and Charge.
Details the ESC key's function to return to previous menus without validation.
Explains the connection method to the OBDII module using an RJ11 cable.
Instructions on how to power on the device by pressing the power key.
Describes the initial display, logo, region selection, and software revision number.
Guide on selecting the vehicle manufacturer through alphabets and automakers.
Instructions on browsing and selecting specific vehicle models.
Steps to select the correct vehicle year for diagnosis.
How to choose the desired function like 'DIAGNOSE SENSOR'.
Explains the sensor activation and response during diagnosis.
How to select the carmaker for duplicating an O.E. sensor.
How to select the vehicle model for sensor duplication.
How to select the vehicle year for sensor duplication.
How to select the duplication function for a new sensor.
Describes the sensor ID search process by the Sensor AID.
Explains displaying the O.E. sensor ID and programming the Uni-sensor.
Details the sensor duplication, flash erase, program, and verify steps.
How to select the Manual Duplicate function.
Explains how to find the Sensor ID on a dead O.E. sensor.
How to select the manufacturer for manual duplication.
Provides guidance on where the sensor ID is located.
How to input the O.E. sensor ID to program the Uni-sensor.
How to select ID format (Hexadecimal or Decimal).
How to select the Program Blank Sensor function.
Describes the process of programming a blank sensor.
Explains the notification upon successful sensor programming.
How to select the carmaker for wireless ID/RL modification.
How to select the vehicle model for wireless ID/RL modification.
How to select the vehicle year for ID/RL modification.
How to select the wireless ID/RL modify function.
How to select the Sensor ID Copy function.
How to diagnose and scan the sensor ID of an object sensor.
How to copy the O.E. sensor ID to the target sensor.
Explains the notification for successful sensor modification.
How to select the Manual ID Modify function.
How to scan the original ID of the target sensor.
Describes the display of the target sensor ID after scanning.
How to input the new sensor ID manually.
Explains the notification for successful sensor modification.
How to select the Manual R/L Modify function.
How to scan the original ID to confirm the target sensor.
Explains displaying sensor ID and setting R/L.
How to select the wheel position (R/L) for modification.
Explains the notification for successful sensor modification.
How to set the wheel number to 4 for PC transfer.
How to select the Diagnose Sensor function to start.
Describes scanning IDs for all four wheels.
Indicates the device is ready to connect to the PC.
How to connect the tool to the PC using a USB cable.
How to upload and save the ID data to the PC application.
How to select the carmaker for OBDII operations.
How to select the vehicle model for OBDII operations.
How to select the vehicle year for OBDII operations.
How to select the OBDII function from the menu.
How to manage previously stored TPMS data.
Describes the process of scanning sensor IDs starting from LF.
Explains obtaining multiple sensor IDs from the scanning process.
Steps to connect the OBDII module to the vehicle and tool.
How to select and initiate reading car ID data.
How to select and initiate writing car ID data.
Describes the process of writing sensor IDs to the vehicle's ECU.
Explains the notification upon successful writing of car ID.
Describes the process of reading sensor IDs from the vehicle's ECU.
Explains the notification upon successful reading of car ID.
How to choose the preferred language for the device interface.
Details the serial number's use for firmware updates.
How to choose between EUR and USA regions for the device.
How to set the number of wheels for scanning (1 or 4).
How to choose between Fahrenheit and Celsius for temperature.
How to choose between PSI and kPa for pressure.
How to change the ID format between decimal and hexadecimal.
How to adjust the auto-off time or disable the feature.
How to adjust the screen contrast level.
How to enable or disable the device's buzzer.
Steps to install the Sensor AID software from the CD.
Notes on the requirement and installation of .NET Framework 4.0.
How to accept the license agreement to proceed with installation.
How to connect the Sensor AID device to the PC via USB.
How to open and select the correct update file from the PC.
How to click the 'Program' button to initiate the update.
Describes the yellow flashing light indicating an active update.
Describes the solid green light indicating a completed update.
Details the 365-day warranty and coverage terms.
Explains the conditions under which the product will be repaired or replaced.
Lists reasons such as misuse that may void the warranty.
How to contact a distributor for repair or replacement.
States CUB autoparts' limitation of liability for consequential loss.
Clarifies that valves and screws are not covered by warranty.
Warns against using non-CUB parts to avoid voiding the warranty.
Safety rules for turning on the device, especially regarding wireless use.
Safety instruction to not use the device near refueling points or chemicals.
Safety instruction to avoid using the device where blasting is in progress.
Notes that wireless devices may be susceptible to interference.
Rules for using the device in its normal position and avoiding antenna contact.
Safety advice for connecting the device to other equipment.
States that the device is not water-resistant and should be kept dry.
Recommends that only qualified personnel service the device.
Advises using approved enhancements and charging the battery fully.
Provides safety instructions for battery disposal and recycling.
Explains the FCC limits for Class B digital devices regarding radio frequency energy.
Lists methods for users to correct radio interference.
States compliance with Industry Canada license-exempt RSS standards.
Notes that CE marked products comply with essential EU directives.
Indicates compliance with the WEEE directive for proper disposal.
Provides the company's address and website for information.
How to contact for warranty claims or general inquiries.
