20
DISPLAY OPERATION AND CONTROL
Please unfold the cover of these supplementary instructions. The dia-
gram shows the display of your CUBE EPO pedelec with all control
elements and values. Leave this page unfolded as you read so that
you can easily locate the switches and displays as they are referred
to in the text.
The display on the handlebars of your CUBE EPO pedelec is wireless.
Basic Settings
Removing and Mounting the Display
To remove the display from the holder, press the button on top of the
display. Now you can carefully lift out the display towards the front
and remove it from its holder. Do not use brute force!
To remount the display, slide it carefully into its holder on the han-
dlebars. The display engages with a click that you will hear and feel
clearly.
Inserting the Battery
(a)
Open the cover on the rear side of the display by using a coin and
turning it to the left. Insert the battery (type 2032, 3V) with the “+“
mark showing to the top. Subsequently, reclose the cover by turning
the coin to the right. Switch on the unit by pressing the AC-button on
the rear side with a pointed object.
Manual Setting
Lock the display in the holder and press the middle M-button
(b)
for
more than 3 seconds to access the conguration menu
(c)
. The O and
U-buttons allow you to change into the desired menu. If you want to
change any settings, press the M-button.
ba c
Cube_EPO_Gesamt_EN_2011-05.indd 20 11.05.2011 10:11:28
To Next Page
Loading...
Need help?
General
