EasyManua.ls Logo

Cube EPO pedelec - Technical Specifications

Cube EPO pedelec
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
TECHNICAL SPECIFICATIONS
Drive
Continuous rated power (statutory): 250 Watt
Torque at drive: 40 Nm maximum
to 10 Nm nominal
Nominal voltage: 36 Volt
Operating and storage temperature:
Charging:
• min. 0 to max. 45 degrees Celsius
(32 to 113 degrees Fahrenheit)
• recommended from +10 to +30 degrees Celsius
(50 to 86 degrees Fahrenheit)
Discharging:
• -10 to +55 degrees Celsius
(5 to 140 degrees Fahrenheit)
Normal charger
(includedinscopeofdelivery): • chargingcurrent:2amp
• charging time: 3.5 to 4 hours
Rapid charger
(specialequipment): • chargingcurrent:5amp
• charging time: 1.5 to 2 hours
Number of (full) charge cycles: 1,000
Rechargeable battery is splashproof
Display
High-resolution LCD
Battery: CR2032
Weight: 23.5 grams
Transmission standard: ANT
Button: Easy reach remote control at the grip
b da c
Cube_EPO_Gesamt_EN_2011-05.indd 42 11.05.2011 10:11:34

Table of Contents

Related product manuals