3
CUES Inc., MPlus+ User Manual | CH905
www.cuesinc.com, | salesinfo@cuesinc.com
SET-UP & INSTALLATION
INSTALLING THE DEBRIS BAG -
STANDARD MPLUS ONLY
An optional debris bag is provided to prevent
debris from spilling/leaking out during and
after the inspection.
To attach the debris bag, perform the
following:
Wrap the bag around the coiler / cable as
shown below.
Continue wrapping around the coiler and
then loop it through the bottom of the unit.
Attach the velcro ends together to secure in
place.
To Next Page
Loading...