1
CUES Inc.,MPlus+ User Manual | CH905
www.cuesinc.com, | salesinfo@cuesinc.com
INTRODUCTION
MPLUS+ SYSTEM INTRODUCTION
This manual includes setup, operation, troubleshooting, and maintenance instructions for the CUES
MPlus Portable Lateral & Mini-Mainline Push System. Equipment information is included in the
Equipment Overview chapter in this manual. The instructions in this manual are for the MPlus system
and its components only.
The MPlus System is designed to inspect service laterals and/or pipelines ” through ” in diameter. The
system operates as a stand-alone system, but is also fully compatible with external observation software or
other asset management systems. An optional mainline interface is available for operation with standard CUES
TV trucks. The MPlus can be powered from the built-in, rechargeable battery, AC mains power, or
VDC power.
If uncertain about your specic system or need more information regarding the MPlus,
please call our Customer Service Department at ---.
The CUES MPlus is designed to:
• Operate as an All-In-One system or the modular design allows the control unit to be
removed and used separately or to accommodate compact storage.
• Operate with a standard TV inspection system (optional).
• Multiple camera heads are available including self-leveling for ” through ” pipelines and an
advanced Pan & Tilt camera head for ” through pipelines.
• The standard conguration reel will operate/store up to ’ of berglass rod push cable
(optional) optimized for lateral applications.
• The optional large conguration XL reel will operate/store up to ’ of berglass rod push
cable optimized for mainline and large pipe applications.
• A third reel, the CUES IGGY reel with up to feet of cable, is also available.
• Operate in extreme conditions with the heavy duty construction and weather / water
resistant, injection-molded control unit.
STANDARD MPLUS SHOWN
To Next Page
Loading...