4
CUES Inc.,MPlus+ User Manual | CH905
www.cuesinc.com, | salesinfo@cuesinc.com
OPERATING THE SYSTEM
MINI PAN & TILT STATUS
PAN STATUS: UNKNOWN
ROTATE STATUS: UNKNOWN
FOCUS STATUS: UNKNOWN
SELF-LEVELING: UNKNOWN
AT HOME (PAN): UNKNOWN
SONDE STATUS: UNKNOWN
MPT STATUS
The MPT Status screen displays the panning, rotating, focus, self-leveling, at home
and sonde status of the MPT camera.
Pan status can be LEFT, RIGHT, OFF.
Rotate status can be CCW, CW, OFF.
Focus status can be NEAR, FAR, OFF.
Self-Leveling can be ON or OFF.
At home (Pan) can be YES or NO.
Sonde status can be ON or OFF, Hz or KHz.
Pressing the Home button on the MPlus keyboard both homes the camera and turns
on self leveling. Self leveling is turned o whenever rotating, either clockwise or
counter-clockwise is selected on the MPlus keyboard. At Home is set to NO whenever
the operator pans a certain distance left or right from the home position.
If the system is unable to read the MPT camera, the values for these elds will be set
to their initial values ‘UNKNOWN’.
To Next Page
Loading...