CUES MPlus+ - Page 58

4
 CUES Inc., MPlus+ User Manual | CH905
www.cuesinc.com, | salesinfo@cuesinc.com
OPERATING THE SYSTEM
SELECT OBSERVATION CODE TYPE
CUES CODES
OTHER CODES
CUSTOM CODES
The observation code type selected through this menu aects which set of codes is displayed
when the operator presses the OBSERVATION CODES button.
SELECT OBSERVATION CODE TYPE
EDIT CUSTOM CODES
CREATE CUSTOM CODES
DELETE CUSTOM CODES
Selecting CREATE CUSTOM CODES allows the operator to add up to  custom codes of
up to  characters, each of which will be added to a sorted list that is displayed when the
OBSERVATION CODES button is pressed and the observation code type has been set to
CUSTOM CODES.
The rst character of each custom code input will be converted to upper case, which is
needed for display and sorting purposes when showing the observation code list (see section
on OBSERVATION CODES later in this manual).
After pressing ENTER, the operator may continue adding additional custom codes until the
maximum limit () is reached.
EDIT CUSTOM CODES