INTRODUCTION | 3
About this Manual
This manual is intended primarily as a guide for the driver and should be used only in conjunction
with a period of formal instruction to ensure complete operator competence.
Care and attention will ensure safe and efficient performance an d operation. Yo u mu st have th e
maintenance operations carried out at the periods specified in the Preventative Maintenance
section of this manual. Never run the vehicle in a doubtful condition. Report any and all defect or
malfunctions to your garage/maintenance department for inspection and competent attention.
Throughout this manual, Left Hand (L.H.) and Right Hand (R.H.) sides will be referenced. The L.H. and
R.H. sides indicate a position on the unit from the perspective of sitting in the driver’s seat.
Please read and remember the safety precautions; they are given for your protection and must be
followed at all times.
Before operating this vehicle it is essential that this manual is read and understood, and that training
is undertaken in the correct and safe use of this vehicle. This manual covers only the Quantum rear
loader (Compact Series). Important safety information will also be found in the applicable chassis
manual/handbook which must be read and understood in conjunction with this manual.
Although every endeavor has been made to be technically accurate in the complication of this
manual, it is imperative that the reader contact Curbtender, Inc should any error be noticed.
***THIS MANUAL SHOULD ALWAYS BE KEPT IN THE VEHICLE FOR WHICH IT WAS ISSUED WITH***
WARRANTY INFORMATION
The goal of Curbtender, Inc. is to produce innovative products of the highest quality in design and
manufacture. These products are expected to provide our customers with excellent service for
many years under normal usage. Should any equipment not meet this goal, it is our policy to
correct and resolve the situation through warranty procedures. In order to provide a timely
resolution of warranty coverage with the least inconvenience to our customers, these
warranty procedures should be fol-lowed closely. It will be the dealer’s responsibility to
ensure that all requirements of warranty are met.
Pre-Delivery Inspection Report
Prior to shipment of each CURBTENDER unit or equipment item, an Inspection Report is completed
as to its condition and operation. Because other conditions arise during and after shipment due to
transport, handling, storage, etc., it is necessary that the Dealer complete a Pre-Delivery Inspection
Report prior to the customer taking receipt. This will help ensure the quality and condition of the
product and pre-pare it for service by the customer. The completed Pre-Delivery Inspection Report
must be returned to Curbtender, Inc to qualify the product for warranty considerations.
To Next Page
Loading...