36 | CURBTENDER, INC
7
Checks and Adjustments
MAKE SURE YOU KNOW AND OBSERVE ALL SAFETY
PRECAUTIONS LISTED IN SECTION 2 BEFORE PERFORMING
ANY OF THE FOLLOWING CHECKOUT PROCEDURES. USE EXTREME CAUTION TO AVOID COMING NEAR
ANY MOVING PARTS. NEVER ENTER THE BODY OF THE UNIT WHEN THE TRUCK IS RUNNING.
CHECKOUT
The Quantum Compact is designed and built to provide long periods of trouble free operation.
Performing the checkout procedures in this section, at regular weekly intervals, will ensure the unit
operates to design speci cations and will help prevent unscheduled down time.
Hydraulic Reservoir Fluid Level Check
1) The unit must be in the following position with all cylinders retracted:
A) Packing panel as close to front of unit as possible.
B) Tailgate lowered.
C) Carriage and sweep panels in the start position, both fully retracted.
2) The uid level should be in the safe range on the sight gauge.
Electrical System Check
1) Main Control Box (in-cab)
A) Tailgate On Light (when tailgate is raised)
B) System On Light
C) PTO On Light
D) Strobe Lights / Rotating (option)
E) Work Light (option)
To Next Page
Loading...