40 | CURBTENDER, INC
ADJUSTING ACCELERATOR PROXIMITY SWITCH
1) With the engine running and the unit operating, operate the tailgate packing mechanism. If
the engine accelerates while the packing panels are in motion, the proximity switch is
operating correctly.
IF NOT
2) Loosen the nuts retaining the accelerator proximity switch, and adjust the switch to give
approximately a 1/8th inch gap between the switch and the linkage ag. Then tighten the
switch retaining nuts securely.
3) Repeat step 1.
4) Once the switch is adjusted properly, apply silicone to the retaining nuts to lock them in place.
To Next Page
Loading...