2 | CURBTENDER ENGINEERING
SAFETY MESSAGES
Safety must always be given ī rst consideration. Look for the Safety Alert Symbol throughout
this manual for important safety information. This symbol alerts you that personal injury or
property damage is a possibility unless specified precautions are taken. Additional Safety
Information is contained throughout this manual.
Important Safety Notices
Proper maintenance and service are important to the safe, reliable operation of all
CURBTENDER products. DO NOT service this equipment/machine until you have read and
understood this manual. Service procedures recommended by CURBTENDER are described in this
service manual and are effective for performing service operations. Some of these service
operations may require the use of tools or blocking devices specially designed for the purpose.
Special tools should be used when and as recom-mended. It is important to note that some warnings
against the use of specific methods that can dam-age the product or render it unsafe are stated in the
manual. It is also important to understand that these warnings are not exhaustive. CURBTENDER
could not possibly know, evaluate and advise the service trade of all conceivable ways in which
service might be done or the possible hazardous consequences of each way. Consequently,
CURBTENDER has not undertaken any such broad evaluations. Accordingly, anyone who uses
service procedures or tools which are not recommended by CURBTENDER must first satisfy himself
that neither his safety not the product safety will be jeopardized by the method he selects.
Warning
If incorrectly used this equipment can cause severe injury. Those who use and maintain
equipment should be trained in its proper use, warned of its dangers and should read the entire
manual before at-tempting to set-up, operate, adjust or service the equipment. Keep this manual for
future reference.
Lockout Procedure
During repairs to the tailgate, packing mechanism or hydraulic drive system, a lockout
procedure should be employed whereby the power shall be shut off , the ignition key removed and a
sign placed on the steering wheel warning against any attempt to start the unit.
Operation
DO NOT operate this machine until you have read and understood the Operatorās Manual
supplied with this equipment. When operating be certain that all individuals are clear and be ready to
stop and/or reverse the operation at any point.
Modifi cations
It is the responsibility of any person reconstructing or modifying this equipment to do so in
accor-dance with the appropriate sections of the ANSI Z245.1 safety standard and to furnish
instructions and safety precautions associated with the reconstruction or modification of the unit.
To Next Page
Loading...