12 | CURBTENDER, INC
8) Before operating the vehicle, the driver must be thoroughly familiar with the employer’s
safety program concerning tra c rules, warning devices and hand signals.
9) Know where to get assistance in the event of an emergency.
10) Know your machine. Know the location and the function of all controls, gauges,
instruments and protective devices.
11) Wear your seat belt.
12) Always set the parking brake before leaving the cab.
13) All service opening covers and access doors must be maintained and latched in place
while operating equipment.
14) Ensure all co-workers are in view before operating or moving any controls, or the unit.
15) Ensure that there is su cient overhead clearance before raising the tailgate.
16) Stand clear when the tailgate and or body is being raised or lowered and during the
unloading cycle.
17) Ensure that persons are clear of the container before raising or lowering.
18) Always have the container dumper in the travel position before transporting.
19) Ride only in the cab.
20) Never over ll the hopper.
21) SHUTDOWN>
A) Lower the body and move to its most forward position, if applicable.
B) Lower the tailgate to its lowest position.
C) Set the parking brake.
D) Turn o the control panel.
E) Shut o the engine.
F) Remove the ignition key.
G) Remove any debris from the cab.
To Next Page
Loading...