Curtis 1212 Manual
3
Robust Safety and Reliability
✓ High RF immunity prevents speed variation and shutdowns in noisy
RF environments
✓ Controller power circuits and microprocessor software are
continuously monitored for proper operation
✓ On power-up, system automatically checks the throttle, brake,
and associated wiring, and disables drive if a fault is found
Meets or Complies with Relevant US and International regulations
✓ Designed to meet EN 12184, EN 55022, IEC 61000, and ISO-7176-14
✓ FDA documentation filed
✓ TÜV certification pending.
Familiarity with your Curtis controller will help you install and operate it
properly. We encourage you to read this manual carefully. If you have ques-
tions, please contact the Curtis office nearest you.
1 — OVERVIEW
Working on electric vehicles is potentially dangerous. You should protect
yourself against runaways and high current arcs:
RUNAWAYS — Some conditions could cause the vehicle to run out of control.
Disconnect the motor or jack up the vehicle and get the drive wheels off
the ground before attempting any work on the motor control circuitry.
HIGH CURRENT ARCS — Always open the battery circuit before working on
the motor control circuit. Wear safety glasses, and use properly insulated
tools to prevent shorts.
To Next Page
Loading...
Need help?
General
