Curtis 1212 User Manual

12
Curtis 1212 Manual
DRIVE MENU
ALLOWABLE
PARAMETER RANGE DESCRIPTION
Accel Max Speed 0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied with the speed limit pot is in its maximum speed
position, and the vehicle is traveling forward. Larger values represent
slower response.
Note: Allowable range is restricted by the Accel Min Speed setting.
Accel Min Speed 0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied while the speed limit pot is in its minimum speed
position, and the vehicle is traveling forward. Larger values represent
slower response
Note: Allowable range is restricted by the Accel Max Speed setting.
Decel High Speed 0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling forward at high speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by the Decel Low Speed setting.
Decel Low Speed 0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling forward at low speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by the Decel High Speed setting.
Rev Accel Max Speed 0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied while the speed limit pot is in its maximum speed
position, and the vehicle is traveling in reverse. Larger values represent
slower response.
Note: Allowable range is restricted by Rev Accel Min Speed setting.
Rev Accel Min Speed 0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied while the speed limit pot is in its minimum speed
position, and the vehicle is traveling in reverse. Larger values represent
slower response.
Note: Allowable range is restricted by Rev Accel Max Speed setting.
Rev Decel High Speed 0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling in reverse at high speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by Rev Decel Low Speed setting.
Rev Decel Low Speed 0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling in reverse at low speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by Rev Decel High Speed setting.
Key Off Decel 0.2–4.0 sec Sets the rate (in seconds) that is used to slow down the vehicle at key-off
or in the event of a major fault.
3 — PROGRAMMABLE PARAMETERS:
Drive Parameters

Curtis 1212 Specifications

General

Brand	Curtis
Model	1212
Category	Controller
Language	English