CHAPTER 3: CONFIGURING THE AXN SYSTEM 29
4. Set the PTPv2 Sync Interval to match the Sync interval of your PTPv2 Grandmaster.
5. Set the PTPv2 Priority to match the Priority setting of your PTPv2 Grandmaster.
Setting the AXN/BCU/40x as a PTPv2 peer-to-peer client
1. Set the PTP Protocol to PTPv2 Delay P2P.
2. Set the PTPv2 Subdomain to the required value (0 - 255).
3. Set the PTPv2 Announce Interval to match the announce interval of the PTPv2 Grandmaster.
To Next Page
Loading...