Curtiss-Wright DTS1+ CSfC - Page 50

User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 6 - 16 Encryption
© 2024 Curtiss-Wright Defense Solutions Revision 3.0
2. Format partition 2 SWE container.
Command:
rmcctl -p2 -F
 fmt = ext4
Example
6.4.2.6 Format / Mount SWE Containers (Individual Partitions)
NOTE
NTFS format is not allowed on software encrypted RMC module partitions.
1. Format and mount partition 1 SWE container.
Command:
rmcctl -p1 -F -M
 fmt = ext4, mnt = 1
Example
2. Format and mount partition 2 SWE container.
Command:
rmcctl -p2 -F -M
 fmt = ext4, mnt = 1
Example
6.4.2.7 Format / Mount SWE Containers (All Partitions)
NOTE
NTFS format is not allowed on software encrypted RMC module partitions.
After opening the SWE containers on individual partitions, they can be formatted, mounted, and
used.
1. To only format the SWE containers:
Command:
rmcctl -p all -F
 fmt = ext4
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 100GB NAS 1 1 ext4 0 0 rmc0p1
RMC_S0: 1 1 1 2 25 GB NAS 1 1
ext4 0 0 rmc0p2
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 100GB NAS 1 1
ext4 1 0 rmc0p1
RMC_S0: 1 1 1 2 25 GB NAS 1 1 0 0 0 rmc0p2
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 100GB NAS 1 1 ext4 1 0 rmc0p1
RMC_S0: 1 1 1 2 25 GB NAS 1 1 ext4 1 0 rmc0p2
[!rmcctl] OK