User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 6 - 15 Encryption
© 2024 Curtiss-Wright Defense Solutions Revision 3.0
Command:
rmcctl
If SWE containers are initialized, partition 1 and 2 (p#1 and 2) scryp = 1
Example
6.4.2.4 Open SWE Container (Partition - Same Passphrase)
NOTE
The SWE containers must be opened before they can be used.
Open the SWE containers on all partitions of a 100GB RMC module as follows:
1. Type rmcctl -p all -E and press ENTER key.
2. Enter the password / passphrase and press ENTER key.
If the passphrase is entered correctly the following message will be displayed:
RMC_C0; action=enter status=OK ‘Resetting attempts to 0’.
Example
3. Verify SWE containers are open.
Command:
rmcctl
If SWE container is open, osdm = 1
Example
6.4.2.5 Format SWE Containers (Individual Partitions)
NOTE
NTFS format is not allowed on software encrypted RMC module partitions.
1. Format partition 1 SWE container.
Command:
rmcctl -p1 -F
fmt = ext4
Example
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 50 GB NAS
1 0 0 na 0 rmc0p1
RMC_S0: 1 1 1 2 50 GB NAS 1 0 0 na 0 rmc0p2
[!rmcctl] OK
cw_dts> rmcctl -p all -E passphrase
[rmcctl]
RMC_CO; action=enter status=OK ‘Resetting attempts to 0’
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 50 GB NAS 1
1 0 0 0 rmc0p1
RMC_S0: 1 1 1 2 50 GB NAS 1 1 0 0 0 rmc0p2
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 100GB NAS 1 1
ext4 0 0 rmc0p1
RMC_S0: 1 1 1 2 25 GB NAS 1 1 0 0 0 rmc0p2
[!rmcctl] OK
To Next Page
Loading...