User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 7 - 6 Quick Start
© 2024 Curtiss-Wright Defense Solutions Revision 1.0
8. Open SWFDE container. Type rmcctl -s 0 -p 1 -E and press ENTER.
9. When prompted, enter same SWFDE password / passphrase as previously entered.
10. Mount drive. Type rmcctl -s 0 -p 1 -M and press ENTER.
NOTE
Refer to paragraph 13.3.24 rmcctl for information regarding rmcctl command results.
11. View RMC module status. Type rmcctl and press E
NTER.
DTS1+ CSfC is ready to use with CSfC encryption.
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1
1 1 1 XX GB NAS 1 0 na na 0 rmc0p1
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 XX GB NAS 1
1 ext4 1 0 rmc0p1
[!rmcctl] OK
To Next Page
Loading...