Curtiss-Wright DTS1+ CSfC - Page 89

User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 12 - 1 Simple Network Management Protocol
© 2024 Curtiss-Wright Defense Solutions Revision 0.0
Simple Network Management Protocol
12.1 SNMP MIB
The DTS1+ CSfC supports Simple Network Management Protocol (SNMP). The user may
configure SNMP for a Windows workstation via the Windows Control Panel. The user should
consult with their network administrator for details on configuration and utilization of the SNMP
traps and other data capture programs.
DTS1+ CSfC SNMP Management Information Basis (MIB) Definitions are as follows:
CWCDS-DTS-MIB DEFINITIONS ::= BEGIN
--
-- MIB for CWCDS DTS.
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, enterprises,
NOTIFICATION-TYPE FROM SNMPv2-SMI
OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
;
dtsSnmp MODULE-IDENTITY
LAST-UPDATED "201206250000Z"
ORGANIZATION "www.cwcontrols.com"
CONTACT-INFO
"email: support@curtisswright.com"
DESCRIPTION
"MIB for CWCDS DTS."
REVISION "201206250000Z"
DESCRIPTION
"version 1.0"
::= { enterprises 27675 }
--
-- top level structure
--
dtsSnmpValues OBJECT IDENTIFIER ::= { dtsSnmp 1 }
dtsSnmpValuesGroup OBJECT-GROUP
OBJECTS { dtsINFO,
dtsSERV,
dtsIPCONFIG,
dtsRMCFREE,
dtsRMCCTL,
dtsRMCINFO,
dtsLEDCTRL,
dtsSENS,
dtsSYSDATE,
dtsIBIT,
dtsCMLOGIN,
dtsCMKEY }
STATUS current
DESCRIPTION
"Group of all DTS variables."
::= { dtsSnmp 4 }
--
-- Values
--