EasyManuals Logo

Custom Audio Electronics KPM 216 H User Manual

Custom Audio Electronics KPM 216 H
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM216H
233-
nnoitcnuF
11ogolknabhsalfotnitnemomehttadesuegapcihpargsrefsnarT
[Notes] This command makes the flash copy of the graphic page in use. If the
graphic page has been cancelled by a printing command, the stored logo
will be white.
[Default]
[Reference] ESC ·, ESC ², ESC ³
[Example]
n! SG
[Name] Select character size
[Format] ASCII GS ! n
Hex 1D 21 n
Decimal 29 33 n
[Range] 0 n 255
[Description] Selects character height and width, as follows:
• Bits 0 to 3: to select character height (see table 2).
• Bits 4 to 7: to select character width (see table 1).
1elbaThtdiWretcarahCtceleS
xeHlamiceDhtdiW
000 )lamron(1
01612 )x2=htdiw(
0223)x3=htdiw(3
0384)x4=htdiw(4
0446)x5=htdiw(5
0508)x6=htdiw(6
0669)x7=htdiw(7
07211)x8=htdiw(8
thgiehretcarahctceleS2elbaT
xeHlamiceDthgieH
000 )lamron(1
101 )x2=thgieh(2
202 )x3=thgieh(3
303 )x4=thgieh(4
404 )x5=thgieh(5
505 )x6=thgieh(6
606 )x7=thgieh(7
707 )x8=thgieh(8
[Notes] This command is effective for all characters (except HRI characters).
• If n falls outside the defined range, this command is ignored.
• Characters enlarged to different heights on the same line are aligned at
the baseline or topline (see GS ~).
ESC ! can also be used to select character size. However, the setting of
the last received command is the effective one.
[Default] n = 0
[Reference] ESC !

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Custom Audio Electronics KPM 216 H and is the answer not in the manual?

Custom Audio Electronics KPM 216 H Specifications

General IconGeneral
BrandCustom Audio Electronics
ModelKPM 216 H
CategoryPrinter
LanguageEnglish

Related product manuals