Custom Audio Electronics KPM 216 H User Manual

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM216H
293-
tiBnO/ffOxeHlamiceDnuFnoitc
0ffO000 .ecnadnubanitneserprepaP
nO101 .dnerepapraeN
1- - - DEVRESER
2ffO000 .)tneserptonrepap(rosnesdnerepaP
nO404 .)tneserprepap(rosnesdnerepaP
3ffO000 .tuptuoehtnotneserptontekciT
nO808 .tuptuoehtnotneserptekciT
4Off00 0 rotomreppetss'retnirPo.ff
nO0161rotomreppetss'retnirPno.
5ffO000 .fforotomrettimE
nO0223.norotomrettimE
6ffO000 .rorretoN
nO0446.rorrE
7ffO000 .etuorrepapeerF
nO08821.majrepaP
[Notes] m must be sent with n = 3;
with n = 3 if the ticket is not yet cutted, before to perform the command, the
printer made a total cut.
[Reference]
[Example] The correct commands sequence to print a ticket is :
1. Clear dispenser
Ejection (Hex : 1D 65 05) or Retraction (Hex : 1D 65 02)
2. Prints ticket
3. Cuts paper
Total cut (Hex : 1B 69)
4. Dispense
Presents ticket with ≅ 80mm (Hex : 1D 65 03 1E)
nfSG
[Name] Select font for HRI characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:

Custom Audio Electronics KPM 216 H Specifications

General

Brand	Custom Audio Electronics
Model	KPM 216 H
Category	Printer
Language	English