Custom Audio Electronics KPM 216 H User Manual

3. PRINTER FUNCTIONS
KPM216H
323-
code data after receiving 7 (without check digit) or 8 (with check digit)
bytes bar code data.
• The number of data for ITF bar code must be even numbers. When an
odd number of data is input, the printer ignores the last received data.
[Notes per ] • If n is outside of the specified range, the printer stops command
processing and processes the following data as normal data.
When CODE93
is used: • The printer prints an HRI character ( o ) as a start character at the
beginning of the HRI character string.
• The printer prints an HRI character ( o ) as a stop character at the end
of the HRI character string.
• The printer prints an HRI character ( n ) as a control character ( 00H to
1FH and 7FH).
When CODE128
is used: • When using CODE128 in this printer, please note the following re-
garding data transmission:
• The top part of the bar code data string must be a code set selection
character (CODE A, CODE B or CODE C) which selects the first code
set.
• Special characters are defined by combining two characters “{“ and
one character. ASCII character “{” is defined by transmitting “{“ twice,
consecutively.
retcarahccificepSnoissimsnartataD
IICSAxeHlamiceD
TFIHSS{35,B738,321
AEDOCA{14,B756,321
BEDOCB{24,B766,321
CEDOCC{34,B776,321
1CNF1{13,B794,321
2CNF2{23,B705,321
3CNF3{33,B715,321
4CNF4{43,B725,321
'{'{{B7,B7321,321
[Default]
[Reference] GS H, GS f, GS h, GS w
[Example]

Custom Audio Electronics KPM 216 H Specifications

General

Brand	Custom Audio Electronics
Model	KPM 216 H
Category	Printer
Language	English