Custom Engineering KUBE II ETH - CLEANING SCHEDULE; Recommended Cleaning Intervals

MAINTENANCE
29
CLEANING SCHEDULE
Pianifi cazione pulizia
Reinigungsplan
Cleaning your device regularly maintains print quality and may extend the life of the printer. The recommended clean-
ing schedule is shown in the following table.
EVERY ROLL CHANGE
Printing head Use isopropyl alcohol
Rollers Use isopropyl alcohol
EVERY 5 ROLL CHANGES *
Cutter Use pneumatic air
Paper compartment Use pneumatic air or tweezers
Paper path Use pneumatic air or tweezers
Sensors Use pneumatic air
EVERY 6 MONTHS OR AS NEEDED *
Blade for manual tear-off Use pneumatic air
Body Use pneumatic air or soft cloth
* If you use the device in dusty, should reduce the cleaning intervals.
See the following pages for specifi c procedures.