EasyManua.ls Logo

Custom Engineering KUBE II ETH - EMBEDDED WEB SERVER: Sections Overview; Web Server Sections Explanation

Custom Engineering KUBE II ETH
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
To enter the Embedded Web Server,
type the IP address assigned to the
printer into Web browser. For ex-
ample, if IP address of the printer
is 192.168.10.83, type in the Web
browser:
http://192.168.10.83
On the screen will appear the internal
default page that corresponds to the
section “Device Info” The home page
is divided into 6 areas whose func-
tions are described below:
1. SECTIONS:
The web server has six sections
listed within each web page. These
sections are: Device Info, Printer Set-
tings, Network Setup, E-mail Setup,
Printer Support and Login.
2. TOOLS
The tools available within the cho-
sen section are displayed as buttons
(the tool for the “Device Info” section
is a forced refresh of the operating
parameters).
3. REAL TIME STATUS
Report a list of operating parameters
controlled and monitored in real time
(with a regular refresh of 15sec).
Per accedere al Web Server inter-
no, digitare l’indirizzo IP assegnato
alla stampante nel browser Web. Se
l’indirizzo IP della stampante è, ad
esempio, 192.168.10.37, immettere
nel browser Web:
http://192.168.10.83
Verrà visualizzata la pagina principale
interna che corrisponde alla sezione
“Device Info”. La pagina principale è
divisa in 6 aree le cui funzioni sono
descritte di seguito:
1. SEZIONI
Il web server dispone di 6 sezioni
riportate all’interno di ciascuna pa-
gina web. Tali sezioni sono: Device
Info, Printer Settings, Network Setup,
E-mail Setup, Printer Support and
Login.
2. STRUMENTI
Riporta l’elenco degli strumenti dispo-
nibili all’interno della sezione scelta
(lo strumento per il “Device Info “ è un
aggiornamento forzato dei parametri
di funzionamento).
3. REAL TIME STATUS
Riporta un’elenco di parametri di fun-
zionamento controllati che è possibile
monitorare in tempo reale (con un
aggiornamento regolare di 15sec).
Zum Zugang zum internen Web Ser-
ver die dem Drucker im Web Browser
zugeordnete IP Adresse eintragen.
Lautet die IP Adresse des Druckers
beispielsweise 192.168.10.83, so
geben Sie in den Web Browser ein:
http://192.168.10.83
Auf dem Bildschirm wird die inter-
ne Hauptseite angezeigt, die dem
Abschnitt “Device Info” entspricht.
Diese Hauptseite ist in 6 Bereiche ge-
gliedert, die nachstehend aufgeführt
werden:
1. BEREICHE:
Der Web Server hat sechs Bereiche,
die auf jeder Webseite aufgeführt
werden. Diese Bereiche sind: Device
Info, Printer Settings, Network Setup,
E-mail Setup, Printer Support und
Login.
2. TOOLS
In diesem Bereich werden die ver-
fügbaren Tools aufgeführt (das Tool
“Device Info” ist eine forcierte Aktuali-
sierung der Betriebsparameter).
3. REAL TIME STATUS
In diesem Bereich wird eine Liste der
in Echtzeit kontrollierten und über-
wachten Betriebsparameter aufge-
führt (regelmäßige Aktualisierung alle
15 Sekunden).
NOTES:
To know the IP address of the printer, print
the Set-up report of the printer or use “Loca-
tor”.
NOTE:
Per conoscere l’indirizzo IP della stampante,
stampare il rapporto di Setup della stampan-
te o usare il software “Locator”.
HINWEISE:
Die IP Adresse des Druckers kann durch
Ausdrucken des Setup Berichts oder mithilfe
der “Locator” Software abgerufen werden

Related product manuals