Custom Engineering KUBE II ETH - TECHNICAL SPECIFICATIONS: Printer Overview; Printer Specs: General, Interfaces, Memory, Paper

51
TECHNICAL SPECIFICATIONS
GENERAL
Sensors Paper presence on output, cover open, head temperature, near paper end
Emulation ESC/POS
TM
INTERFACES
ETHERNET connector 10Mbit/sec
Drawer connector
MEMORIES
Receive buffer 20 Kbytes
Flash memory 512 Kbytes
Graphic memory 1 logo (608 x 862 dots)
PRINTER
Resolution 203 dpi (8 dot/mm)
Printing method Thermal, fi xed head
Head life
(1)
200 Km
Printing mode Normal, 90°, 180°, 270°
Printing format Height/Width from 1 to 8, bold, reverse, underlined, italic
Character fonts PC437, PC850, PC860, PC863, PC865, PC858 (euro)
Printing speed
(1) (2)
High quality = 104 mm/sec
Normal = 125 mm/sec
High speed = 220 mm/sec / 250 mm/sec
(3) (4)
PAPER
Type of paper Thermal paper, heat-sensitive side on outside of roll
Paper width
80 mm ± 0,5 mm
82,5 mm ± 0,5 mm
Paper weight
58 g/m
2
± 5 g/m
2
90 g/m
2
± 5 g/m
2
Recommended paper
KANZAN KF50 or equivalent (for 58 g/m
2
paper weight)
KANZAN KP470 or equivalent (for 90 g/m
2
paper weight)
Paper thickness 63 μm ± 5 μm (for KF50 paper)
External roll diameter max Ø90 mm
PRINTER SPECIFICATIONS
Caratteristiche della stampante
Merkmale des druckers