Custom Engineering KUBE II ETH - TECHNICAL SPECIFICATIONS: Electrical and Environmental; Printer Specs: Electrical and Environmental Conditions

52
Internal roll core diameter 25 mm (+1mm)
Core thickness 2 mm (+1mm)
Paper end Not attached to roll core
Core type Cardboard or plastic
CUTTER
Paper cut Total, partial
Cutting width 85 mm
Estimated life
(1)
2 000 000 cuts number
Power supply 24 Vdc
Absorption 1,2 A max
PRINTER ELECTRICAL SPECIFICATIONS
Power supply 24 Vdc ± 10%
Medium consumption
(2)
1,17 A
Stand-by consumption 0,08 A
POWER SUPPLY ELECTRICAL SPECIFICATIONS cod. 963GE020000315
(5)
Power supply voltage
from 100 Vac to 240 Vac
Frequence
from 50 Hz to 60 Hz
Current (output)
24 Vdc ± 10%
Power
60 W
POWER SUPPLY ELECTRICAL SPECIFICATIONS cod. 963GE020000003 (optional)
Power supply voltage
from 100 Vac to 240 Vac
Frequence
from 50 Hz to 60 Hz
Current (output)
24 Vdc ± 10%
Power
60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from 0°C to 50°C
Relative humidity from 10 to 85% (w/o condensation)
Storage temperature from -20 °C to 70 °C
Storage relative humidity from 10% to 90%