Level unit
This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will
eliminate rocking during use.
Note: References to left and right are from the users perspective during use.
1. Verify foot plates are completely stopped.
2. Grasp one side of the frame and slowly lift the rear foot off the floor. Lower rear foot to the floor.
Qty.Description
2Frame1
2Lift here2
1Left rear foot3
1Right rear foot4
Page 23 of 82
Cybex 525AT Arc Trainer Part Number 5525-4 F
To Next Page
Loading...
Need help?
General
