CYBEX 525AT - Page 34

Picture
1.
Press or to select Picture.
2.
Press to select access Picture menu.
Adjust range from 1 to 100. Default is 65.Brightness
Adjust range from 1 to 100. Default is 70.Contrast
Adjust range from 1 to 100. Default is 75.Color
Adjust range from 1 to 100. Range is R50 to G50. Default is 0.Tint
Adjust color balance of Red, Green and Blue temperatures.
Color
Temperature
Adjust range from 1 to 100. Default is 60.Sharpness
Select Enabled (Default) or Disabled.Noise Reduction
Set to Auto or Adjust settings as needed. Available only when HDMI signal is
present.
HDMI Picture
3.
Press or to select settings.
4.
Press or to adjust settings.
5.
Press the SETUP button to return to SETUP MODE menu.
Page 34 of 82
Cybex 525AT Arc Trainer Part Number 5525-4 F