Channels
1.
Press or to select Channels.
2.
Press to select access Channels menu.
DVB-T MonitorATSC Monitor
SettingsFeature
Select Air, Cable STD, Cable IRC, or Cable HRC.Signal (ATSC only)
See Below
Auto Program
See Below
Manual Program (DVB-T only)
See Below
Add/Delete Channels
Block channels based on TV ratings.Parental Control
Select channel to display on power up. Select from available
channels or last.
Default Channel
Select Enabled or Disabled. If enabled only one channel is shown,
user cannot change channels.
Channel Lock
Select Enabled or Disabled. If enabled allows user to select any
available channel.
Channel Memory Override
3.
Press or to select settings.
4.
Press or to adjust settings.
Page 35 of 82
Cybex 525AT Arc Trainer Part Number 5525-4 F
To Next Page
Loading...
Need help?
General
