CYBEX 525T - Parts Replacement

Parts Replacement
Base Assembly
End Caps
Tools Required:
• Phillips screwdriver
• Torque screwdriver
Remove end caps
1. Remove two screws securing right end cap using a Phillips screwdriver.
Qty.DescriptionItem
1Right end cap1
2Screws2
2. Repeat step for left end cap.
Install end caps
1. Install the two screws securing the right end cap using a Phillips screwdriver.
Qty.DescriptionItem
1Right end cap1
2Screws2
2. Repeat step for left end cap.
Page 102 of 199
Cybex 525T Treadmill Part Number