CYBEX 525T - Do Not Tighten Screws at this Time; Install the Five Screws and Five Screw Cover Bases Securing the Left Top Step Using a Phillips Screwdriver; Install the Five Screws and Five Screw Cover Bases Securing the Right Top Step Using a Phillips Screwdriver; Install Top Steps

Install motor cover supports
1. Install the two screws securing the right motor cover support using a Phillips screwdriver.
Qty.DescriptionItem
2Screws1
1Motor cover support2
2. Repeat step for the left motor cover support.
Install top steps
1. Install the five screws and five screw cover bases securing the right top step using a Phillips
screwdriver.
Do not tighten screws at this time.
Qty.DescriptionItem
5Screw cover1
5Screw2
5Screw cover base3
1Top step, right4
2. Install the five screws and five screw cover bases securing the left top step using a Phillips
screwdriver.
Page 117 of 199
Cybex 525T Treadmill Part Number