Install top steps
1. Install the five screws and five screw cover bases securing the right top step using a Phillips
screwdriver.
Do not tighten screws at this time.
Qty.DescriptionItem
5Screw cover1
5Screw2
5Screw cover base3
1Top step, right4
2. Install the five screws and five screw cover bases securing the left top step using a Phillips
screwdriver.
Install end caps
1. Install the two screws securing the right end cap using a Phillips screwdriver.
Qty.DescriptionItem
1Right end cap1
2Screws2
2. Repeat step for left end cap.
Page 110 of 199
Cybex 525T Treadmill Part Number