CYBEX 525T - Page 105

Remove motor cover supports
1. Remove the two screws securing the right motor cover support using a Phillips screwdriver.
Qty.DescriptionItem
2Screws1
1Motor cover support2
2. Repeat step for the left motor cover support.
Install motor cover supports
1. Install the two screws securing the right motor cover support using a Phillips screwdriver.
Qty.DescriptionItem
2Screws1
1Motor cover support2
2. Repeat step for the left motor cover support.
Page 105 of 199
Cybex 525T Treadmill Part Number