Update software
Update software using the following procedure.
Complete installation
1. Plug the power cord into the power outlet.
2. Verify the power cord is not being pinched under the front of the treadmill.
3. Operate the unit at all levels to verify proper operation.
Wireless Audio Receiver Module
Tools Required:
• Phillips screwdriver
• Utility knife
• ESD (Electrostatic Discharge) grounding strap
Parts required to install Wireless Audio Receiver Module.
Qty.DescriptionItem
1MYE Universal Receiver Module 900/800 MHz, AD-260361
1Cable, RJ45, AW-235012
1Decal, DE-236393
1Cable, Headphone Jack, AW-238624
Page 191 of 199
Cybex 525T Treadmill Part Number
To Next Page
Loading...
